REMS
REMS Solar Push: K 60 - 115312
REMS Solar Push: K 60 - 115312 For fast, easy filling, flushing, and venting of closed systems all in one action, go with the reliable power of the REMS Solar Push: K 60. With a centrifugal pump,...
My Account
If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New Account1000s of products
Agents are avaialble 8AM - 5PM M-F
Presales and Postsales
In-stock Orders ship within 24-hours
When you’re looking for a quality, accurate pressure tester for pipe systems and receptacles, look to the REMS Solar Push: I 80. Featuring an impeller pump, the Solar Push can handle pressures up to 0.65 MPa/605 bar/94 psi to quickly and effectively get the job done. This pump is ideal for solar power systems, ground heat systems, and underfloor/wall heating thanks to its high transport capacity of 18 l/min at a 40m pumping head, self priming capability, and ability to provide fast, easy filling, flushing, and venting of closed systems all in one action.
Equipped with a dry self-suction impeller pump with a special impeller, the Solar Push: I 80 is capable of handling different transport media at a continuous load with a temperature of no greater than 80-degreeC, such as heat transfer liquids, antifreeze, water, aqueous solutions, and emulsions. The pump is capable of a high transport volume of 27 l/min for fast and efficient filling, flushing, and venting and for filling up tanks with a powerful 1000W, quiet condenser motor. The pump is equipped with two 12mm T100 (synthetic rubber) flexible EPDM fabric hoses for pressure and return lines, each 3m long, with 19mm hose screw fittings that are high temperature-resistant of no greater than 100-degreeC.
The Solar Push is easily transported to and from the jobsite thanks to a stable, mobile tubular steel frame with two large, air-filled tires. The sturdy UV-stabilised PE plastic tank is easily removed and cleaned and can hold up to 30 litres with a filling level indicator. For easier filling, the pump has a wide opening with a practical screw cap. The return connection with an immersion pipe helps avoid foaming of the transport medium when it enters the plastic tank, and the stop tap allows for the easy changing of the plastic tank when using a different transport media.
We ship the same business day*
We use SSL with 256 bit encryption
Over 40 years in business
We staff experienced experts