REMS E-Push 2 – Electric Test Pump - 115500

For ideal pressure and tightness tests of piping systems and receptacles, trust the dependable electric power of the REMS E-Push 2. The E-Push 2 is a universal pump that can be used effectively for a variety of applications, including sanitary, heating, solar and sprinkler installation, compressed air, steam, and cooling systems, oil installations, and in boiler and pressurized vessel construction. Capable of electric charging and testing of up to 6 MPa/60 bar/870 psi with a pumping capacity of 6.5 l/min, this pump provides exceptional power and strength for consistently accurate tests.

The 6 pressure limiting stages are adjustable to the necessary pressure in the pipe system or tank and include a range of 1-6 MPa/10-60 bar/145-870 psi. The high-power, wear-resistant piston pump provides quality suction and runs in a sealed oil bath with a wear reduced pressure piston in stainless steel for maximum durability and performance that lasts. To prevent the hose from running empty in standstill times and to allow for shorter suction times, a non-return valve has been included in the suction hose, while the high-pressure hose itself features a 12mm connection as well as a fabric ply to prevent measurement errors. The pump is powered by a fast and powerful 1300W capacitor motor.

REMS E-Push 2 – Electric Test Pump – RM115500 Quick Specs:

• Weight: 12.4200kg
• Length: 480mm
• Width: 295mm
• Height: 335mm

REMS RM115500 Package Contents:

• 1 x RM115500 REMS E-Push 2 – Electric Test Pump
• 1 x 1.5m suction hose with 12mm connection and gaskets
• 1 x 1.5m high-pressure hose with 12mm connection and gaskets